Connection Lost; Graphic Eq Doesn't Affect The Sound; Problems Moving Multiple Faders; Stagemix Facebook Page - Yamaha CL3 User Manual

Yamaha Commercial Audio
9.3

Connection Lost

If StageMix loses its connection to the console, the following message will
appear. Operation of StageMix is not possible while this message box is
onscreen. StageMix will automatically attempt to reconnect to the console. If
this is successful, StageMix will re-synchronize with the console data and
operation will become available again.
9.4

Graphic EQ Doesn't Affect the Sound

If a Graphic EQ is assigned to an input channel or Mix/Matrix bus but it doesn't
seem to be affecting the sound on that channel, it could be that the Insert for
that channel has been switched Off. Check the state of the Insert ON switch
in the console.
9.5

Problems Moving Multiple Faders

If Multitasking Gestures (in iOS 4.3 or higher) is ON, it may not be possible to
move more than three faders simultaneously in StageMix.
StageMix, it is recommended that Multitasking Gestures be turned OFF.
a. Open the iPad "General" menu
b. Set the button for "Multitasking Gestures" to OFF
9.6

StageMix Facebook Page

To exchange information and tips with other StageMix users, please visit our
Facebook page: http://www.facebook.com/StageMix
CL StageMix V3.0 User Guide
When using
Page 36