Installing From A Windows 95 Pc - Yamaha 03DVEK Owner's Manual

Installing from a Windows 95 PC

1. Connect an 8-pin mini DIN to 9-pin D-sub cable between the 03D's TO
HOST port and a serial port (COM port) on the PC.
2. Turn on the PC.
3. Insert the 03D Video Edit Suite floppy disk into the floppy disk drive, and
then copy the "03VEKxxx.T" and "03VEKxxx.X" files to the HyperTermi-
nal folder on your hard disk (Hard Disk–>Program Files–>Accesso-
ries–>HyperTerminal.
4. While holding down the [UTILITY], [DYNAMICS], and [EFFECT 2] buttons,
turn on the 03D.
The UPDATE PROGRAM page appears.
5. Double-click the Hypertrm icon to launch the program.
The Connection Description dialog box appears.
6. Enter a name for the connection (e.g., "03D"), and then click OK. Ignore
the icon settings in this dialog box.
The Phone Number dialog box appears.
7. Choose "Direct to Com x" from the Connect using menu (x being the
number of the serial port to which the 03D is connected), and then click
OK.
The Port Settings dialog box appears.
8. Make the following settings, as shown on the dialog box below, and then
click OK.
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
9. Choose Connect from the Call menu.
10. On the 03D, use the cursor buttons and [ENTER] button to make the fol-
lowing settings.
PORT: TO HOST
FLYING: ON
UPDATE BLOCK: ALL
11. In HyperTerminal, choose Send File from the Transfer menu.
The Send File dialog box appears.
Installing from a Windows 95 PC
03D Video Edit Suite Software—Owner's Manual
6