Wake Up On Lan - CHAINTECH 9BIF3 Manual

WOL (Wake-on-LAN) Connector (CN5)
WOM (Wake-on-Modem) Connector (CN5A)
Smart Card Reader Connector (CN7)
Blue LED Connector(CN17)
USB 0/1 Ports, USB 2/3 and 4/5 Connectors (USB1/CN23/CN23A)
Front Panel Audio Connector (CN24)
Enable the Wake Up On LAN selection in BIOS's Power
Management Menu to use this function. The capability to remotely
manage PCs on a network is a significant factor in reducing
administrative and ownership costs. Magic Packet technology
is designed to give WOL capability to the LAN controller. This
header is used to connect an add-in NIC (Network Interface Card)
which gives WOL capability to the mainboard.
Enable the Wake Up On Modem selection in BIOS's Power
Management Menu to use this function. This header is used
to connect an add-in modem card which gives WOM capability
to the mainboard.
This connector must be connected to an optional Smart card
reader.
This feature work entirely the same as the power indicator LED,
both shows the system's power status. The only difference is that
this one is blue while the other is red LED.
If you want to use a USB Keyboard, you must enable the USB
keyboard support function in BIOS's Integrated Peripherals menu
(See Section 3-4). This board contains a USB Host controller and
includes a root hub with two USB 0/1 ports and two connectors
for optional USB Adaptor (USB 2/3 and 4/5).
This connector give you the option of a front panel audio jack
cable ext. to be plug into a special custom designed system case.
Simply remove the two jumper caps at pin 5-6 and 9-10 then plug
it into the (optional) cable ext. connector. Pin 5-6 and 9-10 are
shorted (default) to enabled the back panel audio function.
Hardware Setup
9