Cn4C Spdif Kit Connector (Optional); Cn5 Wake On Lan Connector; Cn7 Smart Card Reader Connector; Cn17 Blue Led Connector (5V) - CHAINTECH 7VIL User Manual

CN4C (SPDIF KIT Connector) OPTIONAL
The SPDIF-in / out connector supports the digital audio. This connector must be
connected to the cable from an external device. Connect the SPDIF bracket to this
connector.
CN5 [WOL (Wake-on-LAN) Connector]:
Enable the Wake Up On LAN selection in BIOS's Power Management Menu to use
this function. The capability to remotely manage PCs on a network is a significant
factor in reducing administrative and ownership costs. Magic Packet technology is
designed to give WOL capability to LAN controller. This header is used to connect
an add-in NIC (Network Interface Card) which gives WOL capability to the
motherboard.
Chapter 2
19
Chapter 2
CN7 (Smart Card Reader Connector):
This connector must be connected to a Smart card reader, which allows you to
transfer data through Smart Cards and Smart Card user interface software.
CN17 (Blue LED Connector):
This work entirely the same as the power indicator LED, both shows the system's
power status. The only difference is that this one is blue while the other is red LED.
CN23/23A (USB Connector for USB 2/3 and 4/5)
If you want to use a USB Keyboard, you must enable the USB keyboard support
20