Chapter 3 Phoenix-Awardbios Setup Program - CHAINTECH 9BIF3 Manual

Phoenix-AwardBIOS Setup Program
Phoenix-AwardBIOS ROM has a built-in setup program that allows users to modify
the basic system configuration. This information is stored in CMOS RAM so that
it can retain the setup information, even when the power is turned off. When you
turn on or reboot the system, press the Delete key to enter the Phoenix-AwardBIOS
setup program. The primary screen as shown in Figure 3-1 is a list of the menus
and functions available in the setup program. Select the desired item and press enter
to make changes. Operating commands are located at the bottom of this and all other
BIOS screens. When a field is highlighted, on-line help information is displayed on
the right side of the screen.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integreted Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc : Quit
F10 : Save & Exit Setup
Chapter 3 Chapter 3 Chapter 3
Chapter 3 Chapter 3
Phoenix - AwardBIOS CMOS Setup Utility
Time, Date, Hard Disk Type...
Figure 3-1 Setup Program Initial Screen
Award BIOS Setup Program
3 3 3 3 3
Frequency/Voltage Setup
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
11