Power On By Alarm; Wake Up On Lan - CHAINTECH 9BJF2 User Manual

H. Soft-Off by PWR-BTN
When set to Delay 4 Sec., this function allows the power button to put the system
in Suspend, a power saving mode. See Section 2-3 for operation instructions of
the over-ride power button operation wich puts the system in Suspend mode.
When set to Instant-Off the Soft-Off by PWR-BTN function is disabled and the
computer turns completely off when the power button is pressed.
I. Wake Up Events
Power On PCI Card
When enabled, a PCI interface that receives a signal will wake up the system from
soft off and green mode.
Power On By Modem
When enabled, a modem that receives a signal will wake up the system from soft
off and green mode. You should connect the modem to the COM port and turn
on the resume event in green mode.

Wake Up On LAN

When enabled, a LAN that receives a signal will wake up the system from soft
off and green mode.
USB Power On from S3
When enabled, the system is able to power on from S3 mode by a USB keyboard
hot key or mouse click.

Power On By Alarm

When enabled, this setting allows the system to turn back on at a designated
time of the month. User must designate date of month and time of day. This
function is only available when using an ATX power supply and the Software
Power-Off function to turn off the computer. See the Software Power-Off feature
in Section 2-4 of this manual for instructions.
Power On Function
Select Button Only to control your computer power by the button on your system
case. Set this function to Any Key to turn on the computer by touching any key
on the keyboard. Set this function to Mouse Click to turn on the computer by
clicking on the mouse. If you set this function to Hot Key or Password you must
designate the keystrokes that will turn on the computer. Note that the power button
is always able to turn on the computer regardless of how this function is set.
Phoenix-AwardBIOS Setup Program
23