Advertisement
Additional Notes:
• For a single set of cables, the system supports a maximum amperage of
100A; with two sets, it can handle up to 200A.
• Match inverter settings to the number of cables and batteries used for
appropriate charge/discharge rates. Ensure settings align with the
maximum power output of the battery/cable configuration to prevent
inefficiency or damage.
• Always consult the inverter's manual to accurately match settings with
your specific battery and cable setup. Adjust inverter settings to optimize
system performance and safety.
8. Final Verification
• Ensure settings align with the Battery Configuration and Amperage Table.
• Confirm amperage settings match your system configuration using the table.
• Please verify that all connections are firmly secured and ensure there are no
instances of reversed polarities.
9. Commissioning
• Once all checks are completed and settings confirmed, the system is
ready for use.
Note:
Always refer to the manufacturer's manual for detailed instructions and
safety information. The steps provided here are for quick reference and should
be used in conjunction with the manual.
©2024 Power Center
Duracell is a registered trademark of Duracell U.S. Operations, Inc., used under license. All rights reserved.
Manufactured under license and warranty supported by Omega Green Power in San Jose, CA.
Max Hybrid 15 kW
Setup Guide | Quick Start
5
Advertisement
