Advertisement
Internet Connection Guide
Connect the system to the internet using the dongle.
1. Connect to the Dongle Network
• Navigate to your device's(smartphone/tablet) Wi-Fi settings.
• Select the network with the name EAP-##### (##### = the last 5 digits of
your SN number).
• Enter the password provided (e.g., 12345678).
• Note: The Wi-Fi dongle does not have internet access. It's for connecting
to the inverter's dongle only.
2. Log in to Web Portal
• Open a web browser and go to 10.10.10.1.
• Scroll down to "Wi-Fi Connection" and press "Scan" to search local networks.
• Select your HOME Network (do not select the dongle network).
• Enter your personal Wi-Fi password and select "Connect".
3. Save Your Information
• After connecting, ensure you save your configuration.
• If successful, you should see a red and green light on the dongle indicating
a successful connection.
• LED Indicators:
◦ Red LED: Power is on.
◦ Green LED: Connected to the internet and server.
◦ Flashing Green LED: Connected to the router but not the server
(check VPN/firewall settings).
4. Disclaimer
• Connecting the dongle via the IP address only connects the dongle
to the internet.
• You must still create an account via the Power Center App to
manage the inverter settings.
©2024 Power Center
Duracell is a registered trademark of Duracell U.S. Operations, Inc., used under license. All rights reserved.
Manufactured under license and warranty supported by Omega Green Power in San Jose, CA.
Setup Guide | Internet Connection
Max Hybrid 15 kW
Max Hybrid 15 kW
8
Advertisement
