Advertisement
Battery Preferences
Customize the battery's charge and discharge settings based on
time-of-use preferences to ensure optimal battery performance and
maximum energy cost savings.
Setting Up Time-of-Use Parameters:
1. Access the Limiter Tab:
• Navigate to the 'Limiter' section of the inverter's menu.
2. Enable Limited Power to Load
• Activate Limited Power to Load.
3. Enable Time-of-Use:
• Select 'Time of Use' to schedule charge and discharge.
• By default, system discharges mornings/nights and charges during the day.
4. Custom Scheduling:
• Use the table to set specific times for charging or discharging.
• 'Time' column: Enter desired action times.
• 'Power(W)' column: Set power limit.
• 'Batt Charge' column: Define battery charge level.
◦ Under 100%: Discharge to level.
◦ 100%: Charge to full capacity.
5. Charge:
• When charge is selected the time slot is dedicated to charging up to a
battery charge level from the grid (when on-grid) or a generator (when
off-grid).
©2024 Power Center
Duracell is a registered trademark of Duracell U.S. Operations, Inc., used under license. All rights reserved.
Manufactured under license and warranty supported by Omega Green Power in San Jose, CA.
Max Hybrid 15 kW
Max Hybrid 15 kW
Setup Guide | Battery Preferences
9
Advertisement
