Duracell MAX HYBRID Setup Manual page 14

In this chart:

• Charge" (

during that time.

• "Sell" (

) indicates if excess energy is sold to the grid ( ) or not ( ).

• "Battery Charge" displays the targeted battery level for that speciﬁc time.

• "Power (W)" represents the consistent power setting at 8000 Watts.(This

setting is determined by the max amperage settings, 200 amps = 12000

watts, 100 amps = 5,500 watts) This is 56 Vdc (DC battery voltage) x

amperage of batteries located in Battery Configuration and Amperage

Table.) 80 amps = 4,500 Watts, 100 amps = 5,600 watts, 160 amps = 9000

watts, 200 amps = 11200 watts.

• This chart outlines a strategic approach for your solar battery system,

managing energy costs by charging during low-cost grid hours and

discharging during high-cost hours at home.

Conclusion:

• Energy Arbitrage settings are a smart way to manage energy costs

eﬀectively. By understanding and implementing these settings based on

your local utility's rate structure and your energy usage patterns, you

can maximize the beneﬁts of your solar battery system, resulting in

optimized energy use and signiﬁcant cost savings over time.

Manufactured under license and warranty supported by Omega Green Power in San Jose, CA.

) signals whether the battery will charge ( ) or not ( )

Setup Guide | Battery Mode Examples

Max Hybrid 15 kW