CORNING Centrix Installation Instruction

Installation instruction
Issue 3, December 2017
Centrix™ frame right assembly
These installation instructions should be used as a guide by the trained fitter performing the installation.
General information
Warning!
Possible laser/LED radiation in the non-visible spectrum!
Never look into open fiber ends if the level of risk from laser/LED radiation is not known.
The assignment of the risk level must be specified definitively by the site technician/
operator responsible for the communications facility and must be indicated accordingly
(e.g. by attaching standard-compliant warning signs as per the current edition of DIN
EN/IEC 60825-1, and in accordance with the current edition of BGV B2 "Laser radiation").
If there is any change in the technical data relating to the risk level, the warnings must
be adapted accordingly and occupational safety precautions must be taken if required,
see also e.g. the current edition of DIN EN/IEC 60825-2.
Cleaning
Cleaning agents based on alcohol (e.g. isopropyl alcohol) or water (e.g. De.sol.it 2000 or
3000, Ecoclean 2000) should be used for cleaning cables and modules.
Important