Advertisement
Quick Links
Axygen
Gel Documentation System
®
White Light Conversion Screen
Installation Guide
1.
Remove the White Light Conversion Screen from its package.
2.
Launch the Axygen Imaging software. Click on the Settings tab.
3.
Type in "admin" as the password to access the Settings tab.
4.
Check the box next to Enable White Light Conversion Screen.
5.
Go to the Darkroom tab and make sure the option to use White Light Conversion Screen is available.
If not, restart the software.
A Corning Brand
Advertisement
Related Manuals for CORNING Axygen
Summary of Contents for CORNING Axygen
- Page 1 A Corning Brand Remove the White Light Conversion Screen from its package. Launch the Axygen Imaging software. Click on the Settings tab. Type in “admin” as the password to access the Settings tab. Check the box next to Enable White Light Conversion Screen.
- Page 2 After you place your sample on the white light table, Click on Darkroom tab and capture your image using the Trans White light source. When you are finished imaging, place the White Light Conversion Screen into the holder of the Axygen Gel Documentation System’s front door with the white side facing out for future use.
Need help?
Do you have a question about the Axygen and is the answer not in the manual?
Questions and answers