Always check the handle temperature before changing the platform. 2.0 Package Contents Description Corning® LSE™ Mini Incubator Cat. No. 6800 (US plug type) Cat. No. 6803 (EU and UK plug types) Shelf for Mini Incubator (Cat. No. 6801) Instruction manual 3.0 Unpacking...
11.2 x 11 x 14 in. (28.5 x 28 x 33.5 cm) Weight 18.4 lbs. (8.3 kg) NOTE: Not recommended to be used in the cold room. The Corning LSE Mini Incubator is designed to be safe at least when operated under the following conditions: +5 to 30°C ...
6.0 Description of Buttons and Switches Thermometer port Heating indicator light Main power switch Heater control knob 7.0 Getting Started Place the unit on a level surface and plug the unit into a properly grounded outlet of appropriate voltage. Install the shelf at the desired height, shelf edges down. When installing your shelf, remember to leave clearance for the thermometer bulb which will come down from the roof of the chamber.
IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning’s sole obligation shall be to repair or replace, at its option, any product or part thereof that proves defective in material or workmanship within the warranty period, provided the purchaser notifies Corning of any such defect.
This warranty gives you specific legal rights. You may have other rights which vary from state to state. No individual may accept for, or on behalf of Corning, any other obligation of liability, or extend the period of this warranty.
Need help?
Do you have a question about the LSE 6800 and is the answer not in the manual?
Questions and answers