Silvercrest SDRB 1000 B1 Operating Instructions Manual page 7

RISK OF ELECTRICAL SHOCK!
The voltage of the power source must conform to the details given on
►
the type plate of the appliance.
To avoid potential risks, arrange for a defective appliance to be
►
checked and possibly repaired by qualified technicians, or contact
our Customer Service Department.
Arrange for defective power plugs and/or cables to be replaced as
►
soon as possible by the manufacturer, its customer service or by a
qualified technician.
When disconnecting the appliance from the power source, pull only
►
on the plug itself, never on the cable.
Never bend (kink) or crush the power cable, always route it in such a
►
way that it cannot come into contact with hot surfaces and such that
no one can step on or trip over it.
Remove the plug from the mains power socket after every usage,
►
before cleaning the appliance and when refilling the appliance with
water.
Never touch the power cable or the plug with wet hands.
►
Under no circumstances should the appliance be submersed in liquids
►
or liquids be allowed to penetrate the housing. Do not expose the
appliance to humidity and do not use it outdoors. If any liquid gets
into the housing, disconnect the appliance from the mains power
socket immediately and have it repaired by a qualified technician.
│ GB │ IE
■ 4
SDRB 1000 B1