Makesurethehumidifierandalltheinstalledcomponentsareproperlyconnectedbeforestart-up,inaccordancewith
regulations,criteriaandallapplicablelocal,regionalandnationalstandards.
8.1 Interface
8.1.1 Icons
Icon
Lit steadily
Humidity sensor fitted
Limit sensor fitted
Production active
Proportional operating mode
ON/OFFoperatingmode
HumidifierOFF
Voltage sensor operating mode
Current sensor operating mode
Resistive sensor operating mode
Warning in progress
CV input closed (enable signal given)
Displaying and changing the current humidity setpoint
Alarm in progress
Draining in progress
Displayed value is operating hours
Displayshowstemperaturein°F
Displayshowshumidityin%
Display shows temperature in °C
8.1.2 Keys
Key...
Tap and release to...
Gobackalevel
• Scroll down through the values
• Navigate within the menu
• Scroll up through the values
• Navigate within the menu
• Confirmthevaluesonthedisplay
• Set/change the humidity setpoint
924EHPNE4.01 - EHPN series humidifiers
Fig. 54. Distribution rack interface
OFF
In all other cases
In all other cases
In all other cases
In all other cases
In all other cases
Humidifier ON
In all other cases
In all other cases
In all other cases
No warning in progress
CV input open (enable signal not given)
In all other cases
No alarm in progress
In all other cases
In all other cases
In all other cases
In all other cases
In all other cases
Tap and hold for at least 3 seconds to...
HumidifierON/OFF
Go to the maintenance and reset operating hours menu
Activate manual draining
Enter the main menu
|64|Distributionrackuserinterface|
02/2024