H3C WSG1840X Installation Manual page 39

1
Appendix A Chassis views and
technical specifications
Chassis views
Figure1-1 Front view
(1) Reset button (RESET)
(3) Console port
(5) 2.5G/5GBASE-T autosensing Ethernet port
(7) 100/1000BASE-T autosensing Ethernet ports LAN 1 to LAN 4
Figure1-2 Rear view
(1) AC-input power receptacle
Technical specifications
Table1-1 Technical specifications
Item
Console port
USB port
GE port
SFP+ port
Reset button (RESET)
(2) USB port
(4) SFP+ port
(6) 100/1000BASE-T autosensing Ethernet ports
WAN 5 and WAN 6
(2) Grounding screw
Specification
One, 9600 bps (default) to 115200 bps
USB 2.0, used for data transfer
•
6 × 100/1000BASE-T autosensing Ethernet copper ports
•
1 × 2.5G/5GBASE-T autosensing Ethernet copper port
1 × 10G fiber port
•
To restore the device to factory default settings, press
and hold the button for more than 5 seconds after the
device starts up normally.
•
To reset the device, press and hold the button for more
than 15 ms.
NOTE:
1