Installation Accessories; Installation Tools; Pre-Installation Checklist - H3C WSG1840X Installation Manual

•
Make sure the grounding cable of the chassis is grounded reliably.
•
Make sure the grounding terminal of the AC power receptacle is grounded reliably.
•
Install a lightning protector at the input end of the power supply to enhance the lightning
protection capability of the power supply.

Installation accessories

Figure1-2 Installation accessories for the device

Installation tools

No installation tools are provided with the device. Prepare installation tools as required.
Figure1-3 Installation tools

Pre-installation checklist

Table1-4 Pre-installation checklist
Item
Installation
site
Requirements
•
Ventilation
•
Temperature 0°C to 45°C (32°F to 113°F)
There is a minimum clearance of 100 mm (3.94 in))
around the device for heat dissipation.
A good ventilation system is available at the
installation site.
5
Result