Table of Contents
Advertisement
Figure1-5 Attaching the mounting brackets to the front rack posts
Grounding the device
WARNING!
• Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.
Before installing or using the device, connect the grounding cable for it correctly.
• Connect the grounding cable to the grounding system in the equipment room. Do not connect it
to a fire main or lightning rod.
To ground the device:
1.
Use a Phillips screwdriver to remove the grounding screw from the chassis rear panel.
2.
Use the grounding screw to attach a ring terminal of the grounding cable to the chassis.
3.
Use one of the following methods to connect the other end of the grounding cable:
Grounding the device by using a grounding strip
If a grounding strip is available, you can connect the other end of the grounding cable to the
grounding strip. Make sure the grounding strip is grounded reliably.
5
Advertisement
Chapters
Table of Contents
