Table of Contents
Advertisement
Introduction
1.4 SIMOGEAR documentation
1.3.6
Websites of third-party companies
Description
This document may contain hyperlinks to third-party websites. Siemens is not responsible for
and shall not be liable for these websites and their content. Siemens does not check the
information that appears on these websites and is not responsible for the content and
information provided there. The user bears the full risk when visiting these websites.
1.4
SIMOGEAR documentation
Description
Comprehensive documentation on SIMOTICS, SIMOGEAR and on the SINAMICS converter family
are provided in Internet (https://support.industry.siemens.com/cs/de/en/ps/13204/man).
You can display documents or download them in the PDF and HTML5 format.
The documentation is divided into the following categories:
Table 1-1
SIMOTICS / SIMOGEAR / SINAMICS documentation
Information
Documentation
class
General information
Configuration Man‐
ual
Device information
Installation Instruc‐
tions
8
Content
1)
Rules, guidelines and tools for config‐
uring products, systems, and plants.
Further: Information about the operat‐
ing and ambient conditions for hard‐
ware and software, the use of func‐
tions, as well as about circuit diagrams
and terminal diagrams and the instal‐
lation of software assuming that this is
necessary for commissioning.
All relevant information on setting up,
installing and cabling as well as the re‐
quired dimension drawings and circuit
diagrams
Target group
Planners, application engineers
Installation personnel, commissioning
engineers, service and maintenance
personnel
SIMOGEAR Safety-related brake
Operating Instructions, 01/2024, A5E53220852A/RS-AA
Advertisement
Table of Contents
