Standard Scope; Websites Of Third-Party Companies; Simotics Documentation - Siemens SIMOTICS XP 1MB5 Operating Instructions Manual

1.2.4

Standard scope

Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modifications they make to the
product themselves.
1.2.5

Websites of third-party companies

Description
This document may contain hyperlinks to third-party websites. Siemens is not responsible for
and shall not be liable for these websites and their content. Siemens has no control over the
information which appears on these websites and is not responsible for the content and
information provided there. The user bears the risk for their use.
1.3

SIMOTICS documentation

Description
Comprehensive documentation on SIMOTICS, SIMOGEAR and on the SINAMICS converter family
are provided in Internet (https://support.industry.siemens.com/cs/ww/en/ps/13204/man).
You can display documents or download them in PDF and HTML5 format.
1MB5 shaft height 400/450
Operating Instructions, 04/2023, A5E52802354A
Introduction
1.3 SIMOTICS documentation
11