Specific Safety Instructions; General Overview - Siemens SIMOGEAR 2332 Mounting And Operating Instructions

Geared motor with holding brake for safety-related applications

Hide thumbs Also See for SIMOGEAR 2332:

Table of Contents

Specific safety instructions

3.1

Note

Siemens does not accept any liability for damage and operational disturbances that result from

the non-observance of these operating instructions.

Note

EU RoHS Directive and UK Directive

SIMOGEAR geared motors comply with the stipulations laid down in Directive 2011/65/EU and

the UK directive "The Restriction of the Use of certain Hazardous Substances in Electrical and

Electronic Equipment Regulations 2012".

These operating instructions are included with the gearbox when delivered or you can

find them in SIOS (https://support.industry.siemens.com/cs/ww/en/ps/13424/man). Read the

operating instructions before handling the gearbox. Carefully follow the instructions. This is

how you ensure safe and disturbance-free operation.

These operating instructions are applicable for safety-related L brakes (Intorq BFK458), which

are mounted onto SIMOGEAR geared motors. The L brakes mounted onto SIMOGEAR geared

motors are in compliance with the relevant standards listed in the Declaration of Conformity

for safety-related applications.

The BA 2332 Operating Instructions supplement the following operating instructions and can

be found in SIOS (https://support.industry.siemens.com/cs/ww/en/ps/13424/man):

• BA 2030 SIMOGEAR gearboxes

• BA 2330 motors for mounting onto SIMOGEAR gearboxes

• BA 2331 Geared motor with DRIVE-CLiQ safety encoder for safety-related applications

• BA 2730 Geared motor with rotary encoder for safety-relevant applications

For the safety-related brake control, refer to the SINAMICS S120 documentation:

• SINAMICS S120 Commissioning Manual

• SINAMICS S120 Getting Started

• SINAMICS S120 Drive Functions Function Manual

• SINAMICS S120 Safety Integrated Function Manual

• SINAMICS S120 / S150 List Manual

• SINAMICS Guidelines for Handling the Safe Brake Test (SBT)

• EMC Installation Guideline Configuration Manual (6FC5297‑0AD30‑0AP3)

SIMOGEAR Safety-related brake

Operating Instructions, 01/2024, A5E53220852A/RS-AA

Table of Contents