Safety; Symbols Used - PrimeVOLT PV 4K6HB-60 User Manual

1 Safety

1 Safety
1
Safety
Before using the inverter, please read all instructions and cautionary markings on the unit and in this
manual. Put this manual where you can take it easily.
Our ESS inverter strictly conforms to related safety rules in design and test. This inverter must
be installed by the '' Australia local agent professional person who authorized by manufacturer''. This
professional person should familiar with Australia relevant electrical regulations to ensure all installation
comply with Electromechanical regulations. Local safety regulations shall be followed during installation,
operation and maintenance. Incorrect operation work may cause injury or death to the operator or a third
party and damage to the inverter and other properties belonging to the operator or a third party.
1.1 Symbol used
Safety Symbol
5 mins
The RCD used on the main solar supply circuit should be Type A 100mA. This and all associated
wiring must be installed in accordance with AS /NZS 4777.1.
Description
Danger of high voltage and electric shock!
Only qualified personnel may perform work on the inverter.
Danger of high voltage. Residual voltage in the inverter need
5 mins to discharge, wait 5 mins before operation.
Danger of hot surface
Do not disconnect under load! (Fire danger)
Environmental Protection Use Period
Refer to the operating instructions
Product should not be disposed as household waste.
Grounding terminal
1