Bryton Rider 460 User Manual page 27

Manage Sensors via Bryton Active App
NOTE: Sensors only need to be switched if they are in the same type and both are already added in
the list.
1. Select Settings on the home page.
2. Find Sensors.
Add New Sensors
1. Select Add Sensor to add new sensors.
2. Choose any type of sensor that you would like to pair
with.
3. To pair sensors with your device, please have Bryton
Smart Sensors installed first, then wear a heart rate
monitor or rotate the crank and wheel a few times to
wake Bryton Smart Sensors up.
4. For Bike Radars, E-bikes, and Ess/Di2, please turn
the power on before starting pairing.
5. Let the device detect sensors automatically or enter
a sensor ID manually.
6. Pick a detected sensor you would like to pair with
then select OK to save.
Manage Sensors
1. Select the sensor you would like to edit.
2. Turn on or off the status to activate or deactivate the
sensor.
3. Edit the name by clicking the display name.
4. Remove the sensor by pressing Delete.
Switch Sensors
1. Select the sensor you would like to switch to.
2. Press Connect to pair the sensor.
2 7