Bryton Rider 460 User Manual page 14

Auto Sync routes from Strava, Komoot, RideWithGPS
Add POI
After setting up your POI and Peak info, you can check the distance to your next POI or
Peak in Route mode, allowing you to make the right decision based on your status and stay
motivated along the way.
Note:
1.Please pair the device with your smartphone before downloading the route to the device.
2.To view on-device POI info, please add the related POI data fields to the data pages. It is also
recommended to put these data fields in larger grids to see complete information.
1. Enable STRAVA / Komoot / RideWithGPS
auto sync in the Profile > 3rd Party account link tab.
2. Create/modify routes in these platforms and save them
as public.
3. Go to Course > My Route to select the route you want
to download.
Click the "..." in the upper right corner to download the
route to your Bryton device.
4. In the Device Main Menu,Click Course > Route to find
the route and press
1. Go to Course > My Routes in Bryton Active App.
2. Select the route you would like to add POIs.
3. Press POI at the bottom, then click + Add POI.
4. Choose a POI type by selecting the icon.
Slide your finger on the bar below to place the POI
anywhere along your route.
5. Press save and name the POI after confirming the
position.
6. Click the ... in the upper right corner to download the
route to your Bryton device.
7. In the Device Main Menu,Click Course > Route to find
the route and press
to start following the track.
to start following the track.
1 4