Table of Contents
Advertisement
Smart Training
Set up a Trainer
1. Select Menu > Course > Smart Training
3. Select a smart trainer you want to connect to Rider 460.
Edit Information
Go to Trainer Settings to enter Wheel Size, Gear Ratio, and
Bike Weight to set up a smart trainer profile.
Remove Trainers
1. Go to Trainer Settings.
2. Select Remove to select the smart trainer you want to
remove.
3. If you stop peddling for a while, the smart trainer will
automatically disconnect.
Resistance / Slope / Power
1. Select Menu > Course > Smart Training > Set Resistance(Slope/Power).
Start Resistance(Slope/Power) Workout
1. To adjust the intensity, long press
to activate/quit page control mode. In this mode, use
/
to adjust the intensity instead of changing meter pages.
2. You can switch to different control mode in the quick menu.
3. Resistance (Slope/Power) training will automatically stop when the Smart Trainer lost
connection.
Note: You need to connect a smart trainer to the Rider 460 before having access to the Smart
Workout, Resistance, and Power Workout.
2 0
Advertisement
Table of Contents
