Subscribe to Our Youtube Channel
Related Manuals for ITC TS-W103
Summary of Contents for ITC TS-W103
- Page 1 Wifi Full Digital Conference System User Manual TS-W103/W103A Before using this system, please read this manual carefully...
- Page 2 Notification WARNING To ensure the reliability of the equipment and the safety of personnel, please observe the following when installing, using and maintaining: ● If any of the following conditions are found, please immediately turn off the power, plug out and quickly contact your nearest dealer.
- Page 3 ● This product uses a power plug or appliance input socket as a disconnecting device with the power supply, and must be disconnected if necessary for safety reasons. ● This equipment is only suitable for safe use at altitudes under 2000 meters. Precautions 1.
- Page 4 5. Agreement Please strictly follow the instructions in this manual. The software, hardware and appearance of this product will be upgraded and updated continually. The above changes will be made without notice. Non-professional maintenance personnel, do not remove the product, to avoid damage and electric shock.
-
Page 5: Table Of Contents
2. Product introduction................................ 6 2.1 F ..................................6 EATURES 2.2 F ........................7 UNCTION INTRODUCTION OF EACH PART 3. System connection diagram............................. 9 4.TS-W103 / TS-W103A operating instructions......................10 4.1. B ..................................10 4.2. U .................................. 11 NIT TYPE 4.3. C ............................11 ONFERENCE MANAGEMENT 4.4. -
Page 6: System Introduction
1. System introduction The wireless full digital conference system adopts ITC original network communication and digital transmission processing technology with completely independent intellectual property rights. Digital technology and network technology are applied to conference systems. Wireless WIFI and wired full digital are perfectly combined, which can be regarded as groundbreaking in the conference field. -
Page 7: Function Introduction Of Each Part
9. Support voice control. The microphone can be turned on intelligently. You can adjust the voice sensitivity and set the off time via software. 10. Support sign-in function. Set and start sign-in through PC software. 11. Adopt 128-bit AES encryption technology and WPA/WPA2 wireless security technology to prevent eavesdropping and unauthorized access, provide higher confidentiality of the conference system. - Page 8 2.3 Technical specifications Model TS-W103/TS-103A Microphone type Cardioid direct electret 80Hz~16KHz Frequency response 1KΩ Microphone input impedance -46 dBV/Pa Sensitivity 100dB(THD>3%) Maximum SPL >80dB(A) >70dB Crosstalk >80dB Dynamic Range <0.3% Maximum power consumption IEC60914 Standard 18650 lithium battery Power Supply...
-
Page 9: System Connection Diagram
3. System connection diagram... -
Page 10: Ts-W103 / Ts-W103A Operating Instructions
4.TS-W103 / TS-W103A operating instructions 4.1. Boot Power on the host to start the conference system, the screen displays "System Loading ...", the page is as follows; After boot, the touch screen displays the LOGO interface. After connecting to the host network,... -
Page 11: Unit Type
4.2. Unit type The chairman unit touch screen can be used to switch microphones on and off, switch off all delegate microphones, switch between Chinese and English, and adjust brightness. On the touch screen of the delegate unit, you can switch microphones, switch between Chinese and English, and adjust brightness. -
Page 12: Sign In
Prompt as follows when the number of applicants is full: In the NOMAL mode, the excess delegate unit enters the waiting state. When the waiting number is full, the user is prompted to full: Press the chairman unit priority button to turn off the microphones of all delegate units. This chairman unit switch is as follows: 4.4. -
Page 13: Vote
Press the Sign In button on the screen or press the Speech button to sign in. After that, the indicator light keep flashing as follows: 4.5. Vote The wired chairman unit can initiate a vote with three fixed buttons; the PC software can initiate a vote with three/five fixed buttons, and 2/3/4/5 custom buttons, which is as follows: The process of vote with three fixed buttons: Vote with three fixed buttons, press one button and it displays accordingly:... - Page 14 The process of vote with five fixed buttons: Vote with five fixed buttons, press one button and it displays accordingly: The process of rating with five fixed buttons: Rate with five fixed buttons, press one button and it displays accordingly:...
- Page 15 The process of vote with 2/3/4/5 custom buttons: Vote with 2/3/4/5 custom buttons, press one button and it displays accordingly:...
-
Page 16: Fire Alarm
4.6. Fire alarm When the host sends out a fire alarm message, the unit will display a "Fire alarm" prompt, and the red light of the microphone will flash until the host cancels the alarm, and the unit restores to the normal state. -
Page 17: Language Settings
4.9. Language settings Click the Language Setting button, enter the language switching page; you can switch between Chinese and English, which can be saved though power off; the setting page is as follows: 4.10. System status page Click the System Status button to enter the query system, the page is as follows: MAC address: wireless network card MAC address Network name: SSID of wireless AP ID number: ID number assigned by the host... -
Page 18: Service Application
4.12. Service application Participants can send "tea application", "paper and pen application", "human service application" to the background according to actual demands, click the Service Application button on the menu page to enter the page for application, choose the application items to be sent . After selecting a application item, the software will prompt “Are you sure to send the application?”, click Yes to send it, click No to cancel. -
Page 19: Wireless Ap Disconnection Detection Function
4.13. Wireless AP disconnection detection function Turn off the wireless AP power for about 10 seconds, TS-W103 / TS-W103A will pop up the following dialog box. If the wireless AP works normally after being powered on again, the interface will return to the main page. -
Page 20: Wifi Ssid And Password Change
4.15. WIFI SSID and password change In the power-on state, the USB port of the wireless unit is connected to the PC. Then use SSID to modify the software. After the modification is successful, the wireless unit will prompt as the following interface, and automatically shut down after 2 seconds. -
Page 21: Speech Timer And Speech Stopwatch
4.18. Speech timer and speech stopwatch This function is required to be switched by the conference PC software, please refer to the PC software user manual for details. Its function is for speech. For speech timer, the PC set the countdown for speaking. -
Page 22: Charging, Power, Wifi Signal Strength Indication
4.19. Charging, power, WIFI signal strength indication WIFI signal strength, a total of 4 white signal bar, no signal is gray: Electricity, a total of 4 bars: Charging: 4.20. Short message This function is required to be switched by the conference PC software, please refer to the PC software user manual for details. -
Page 23: Power Button Function
4.22. Power button function In the shutdown state, short press the button to turn on the system, In the power-on state, long press the button for 3 seconds to shut down. 4.23. Low signal strength indication When the signal strength is too low and the connection with the AP is not disconnected, the interface is as follows. -
Page 24: Appendix
Appendix 1. Microphone frequency response curve 2. Microphone cardioid curve... - Page 25 Wifi Full Digital Conference System Version 0.2...
Need help?
Do you have a question about the TS-W103 and is the answer not in the manual?
Questions and answers