Before You Get Start 1 - Midea MAP10S1XWBL User Manual

Before you get start
Preparations before installation
The installation must be
M a
n u a
carried out in strict
l
accordance with the
instructions in this manual.
We recommend
doing this with
a helper.
AMBIENT TEMPERATURE RANGE FOR UNIT OPERATING
MODE Temperature Range
Cool
Dry
Know your Portable Air Conditioner
Energy Rating Information
The energy rating and noise information for this unit is based on the standard installation using an
un-extended exhaust duct without window slider adaptor (as shown in the Installation section of this
manual). At the same time, the unit must be operate on the COOL MODE and HIGH FAN SPEED by
remote controller.
The unit with 3 meters extended exhaust duct is running by using 2 exhaust ducts(Diameter:150mm,
Length:1.5m + Diameter: 130mm,Length: 1.5m) .The Energy rating and noise information for unit with 3
meters extended exhaust duct is not assessed. (For some models)
NOTE：
We recommend that operating the unit at room temperature below 35°C . Since there is a risk that the
unit with 3 meters extended exhaust duct would not work at room temperature above 35°C under some
extreme conditions, such as the lower air intake be blocked for 50%.
How to Stay Cool with a New Portable Air Conditioner (For the models comply with
the requirements of Department Of Energy in US).
Because of a new federal test procedure for Portable Air Conditioners, you may notice that the cooling
capacity claims on portable air conditioner packaging are signi cantly lower than that of models
produced prior to 2017. This is due to changes in the test procedure, not to the portable air conditioners
themselves.
16-35°C (60-95°F)
13-35°C (55-95°F)
Installing your AC
should take about
30 minutes.
We're here if you need us,
please contact your local
distributor for assistance.
MODE
Heat(pump heat mode)
Heat(electrical heat mode)
10
Temperature Range
5-30°C (41-86°F)
30°C (86°F)
≥