Introduction - Flo CoRe+ Series Installation Manual

Introduction / Introduction
Déclaration d'Industrie canada / IC Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (A) / NMB-3 (A)
FCC Notice (for USA only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
The enclosed device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (i )
this device may not cause harmful interference and (ii ) this device must accept any interference received, including
interference that may cause undesired operation.
Exposure to Radio Frequency Energy: The radiated power output of the communication modules included in this device is
below the limits recommended for the general population for uncontrolled exposure as defined in the FCC standards. This
device should be operated with a minimum distance of at least 200 mm (7.84'') between itself and a person's body and must
not be colocated or operated with any other antenna in order to comply the conditions of the FCC Grants.
Modifications not expressly approved by FLO (AddÉnergie Technologies inc) could void the user's authority to operate the
equipment.
Symbole du produit / Product Symbols
Les symboles suivants apparaissent sur la station et dans ce guide :
The following symbols appear on the station and in this guide:
4