Table of Contents
Advertisement
302 Driving and parking
System limits
Observe the system limits of the following func-
tions:
Active Parking Assist (
page 284)
/
R
360° camera (
page 274)
/
R
Rear-view camera (
page 272)
/
R
The system may be impaired or may not function
in the following situations:
The gradient is greater than approximately
R
15%.
The height of the ball head above level ground
R
is less than 13.8 in (0.35 m) or more than
21.6 in (0.55 m)
▌Using Trailer Maneuvering Assist
Requirements
The vehicle has been started and is stationary.
R
Vehicle
A trailer is selected on the
R
(
page 307).
/
A trailer has been detected.
R
A calibration drive was performed with the
R
trailer and ball neck used and the current ball
head position (
/
A drive in a straight line was performed to cali-
R
brate Trailer Maneuvering Assist in compliance
with the instructions on the central display
(
page 307).
/
The gradient is less than approximately 15%.
R
The tailgate is closed.
R
The electric parking brake is not applied.
R
The driver's seat belt is fastened.
R
Using Trailer Maneuvering Assist
%
To ensure that Trailer Maneuvering Assist
works properly, the taught-in values for each
ball head position must be reset after the
trailer, the ball neck and ball head position
have been changed. A calibration drive must
then be performed again. Information on
menu
resetting and the calibration drive
(
page 307).
/
page 307).
Engage reverse gear k.
#
Press button 1.
#
The camera image is shown on the central dis-
play.
Advertisement
Table of Contents
