Table of Contents
Advertisement
216 Driving and parking
Configuring the charging settings
Multimedia system:
©
EQ
Charging
4
5
5
Setting the charging program
Select Home,
Work
or Standard.
#
Opening and closing the socket flap using the
MMS
Press
Open socket flap
to open the socket
#
flap.
The charging process can be interrupted using
#
Stop
Charging. The charging process will be
ended and the charging cable released.
Press
Close socket flap
to close the socket
#
flap. The socket flap will also close automati-
cally when the transmission is shifted out of
position j. The socket flap will also close
automatically after one minute if it has been
opened but no plug has been inserted, and ten
to fifteen seconds after the plug has been
removed.
%
Further notes on charging with alternating
current: (
page 208) or direct current:
/
(
page 212).
/
Releasing the charging cable (mode 3 or 4)
%
When the function is active, the charging
cable will be released when the maximum
state of charge is reached.
Home
or Work.
Select
#
Activate or deactivate
Unlock Charging
#
Activating or deactivating location-based charging
Select
Charge at home
or
Charge at
#
Activate or deactivate
Select Based on Loca-
#
tion.
When the function is activated, the vehicle's cur-
rent position will be saved as one of the selected
options. When the address is reached again, the
charging program will automatically be switched
over as soon as parking position j is engaged.
Activating and deactivating ECO charging
Activate or deactivate the function.
#
The
ECO charging
function limits the charging
voltage at charging stations to conserve the vehi-
cle's battery.
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
will always start immediately, irrespective of the
Cable.
next departure time.
Select
Departure
Time.
#
The following charging times can be selected:
work.
individual charging times
R
Week Profile
a
R
Setting an individual departure time
Select
Add New Time
#
ture time.
or
Select ´ and adapt an existing departure
#
time.
and set a new depar-
Advertisement
Table of Contents
