Table of Contents
Advertisement
122 Seats and stowing
Move the steering wheel adjustment
#
lever.
The adjustment process is stopped.
If there is a risk of becoming trapped by the
driver's seat:
Press the switch for seat adjustment.
#
The adjustment process is stopped.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take the
#
key with you and lock the vehicle.
Vehicles with memory function: You can stop the
adjustment process by pressing one of the mem-
ory function position switches.
& WARNING Risk of becoming trapped if
children activate the easy entry and exit
feature
Children could become trapped if they acti-
vate the easy entry and exit feature, particu-
larly when unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take the
#
key with you and lock the vehicle.
In order to use the easy entry and exit feature, the
automatic seat adjustment function must have
been switched on (
page 117).
/
When the easy entry and exit feature is active, the
steering wheel and driver's seat will move as fol-
lows:
The steering wheel will move upwards.
R
The driver's seat will move forward or back-
R
ward to a seat position suitable for getting out
of the vehicle.
This will occur in the following situations:
You switch off the vehicle when the driver's
R
door is open.
You open the driver's door when the vehicle is
R
switched off.
%
The steering wheel will then move upwards
only if it is not already as high as it will go.
The driver's seat will then move backwards
only if it is not already at the rear of the seat
adjustment range.
The steering wheel and the driver's seat will move
back to the last driving position in the following
cases:
You switch the power supply or the vehicle on
R
when the driver's door is closed.
You close the driver's door when the vehicle is
R
switched on.
The last drive position will be saved when:
You switch off the vehicle.
R
Vehicles with memory function: you call up the
R
seat settings via the memory function.
Vehicles with memory function: press one of the
memory function position switches to stop the
adjustment process.
Setting the easy entry and exit feature
Requirements
The automatic seat adjustment has been acti-
R
vated (
page 117).
/
Advertisement
Table of Contents
