Table of Contents
Advertisement
210 Driving and parking
Open socket flap
1
via the EQ module of the
#
multimedia system (
page 320).
/
or
Press the center rear section of socket flap
#
1.
Socket flap
1
will swing open and status dis-
play
2
will light up white.
Vehicles with an electrical socket flap: if an obsta-
cle impedes the socket flap while it is opening,
the socket flap will close again automatically.
%
When the vehicle is started (the õ indica-
tor is lit up on the driver's display), socket flap
1
cannot be opened.
%
Only upper connection
3
is required for the
charging cable connector.
To charge at a mains socket, insert the mains
#
plug into the mains socket of the external
power source as far as it will go.
Insert the charging cable connector into vehi-
#
cle socket connection
3
as far as it will go. If
the wallbox/charging station is not equipped
with a charging cable, insert the plug of the
vehicle's charging cable into the wallbox/
charging station socket as far as it will go.
Make sure that the charging cable is not taut
when inserted.
2
Status display
will flash orange and, as
soon as the high-voltage battery is charged,
blue.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting will
light up for approximately 30 seconds as with
status display
2
(
page 155).
/
When Sound Experience is activated, different
situations, such as the charging cable con-
nector being inserted and removed or the
beginning of the charging process, will be
accompanied by selected sounds. For infor-
mation on Sound Experience, please refer to
the Digital Operator's Manual.
Vehicles with an electric socket flap: if a charging
cable is not connected to the vehicle after the
socket flap has been opened, the socket flap will
close again automatically.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display will be shown on the driver's display
with a charging prediction. The charging predic-
tion refers to the time at which the high-voltage
battery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
Advertisement
Table of Contents
