Supra Cover - Skier's Choice Supra Boats SV 2024 Owner's Manual

SUPRA COVER

Your Supra boat cover is made from the fi nest material
and webbing to ensure that your boat will be protected in
the off season. The cover has been designed to fi t securely
around each boat.
Use the following procedure when covering the boat:
1. Be sure that the cover fi ts snugly at the bow then unfold from front to
back.
2. Be sure to install cover pole(s) and adjust to proper height. This will keep
water from gathering in the center, which can damage the cover.
3. Use the ratchet system to tighten the drawstrap.
4. Loop the Taps 2 system over the tower pylon and pull the rope tight if it's
around tower type cover
Folding Cover
When folding the cover for storage, be sure the cover is dry. Take care not to
scratch the canvas fi nish against rough surfaces. Store in a dry location.
Cover Repair
If the cover becomes damaged, immediately patch and reseal the area. Use a
tent seam sealer to reseal any new stitches. Spray fabric guard on scraped or
worn surfaces. Tears should be repaired professionally and stitches sealed to
prevent leakage.
Swim platform cover
A cover has been designed to fi t securely around the swim platform. If
equipped, place cover around platform and secure with buckles under the
swim platform.
Pg 107