Safety Warnings And Iec Symbols; General Description - Omega MDS-DTM-RTD Series User Manual

1
Introduction

1.2 Safety Warnings and IEC Symbols

This device is marked with international safety and hazard symbols in
accordance with EN61010-1. It is important to read and follow all precautions
and instructions in this manual before operating or commissioning this device as
it contains important information relating to safety and EMC. Failure to follow
all safety precautions may result in injury and/or damage to your calibrator. Use
of this device in a manner not specified by the manufacturer may impair
protection devices and safety features provided by the unit.
IEC symbols

1.3 General Description

OMEGA's new MDS-DTM-RTD Series Benchtop Meter has the functions of a
digital temperature meter, enclosed in a benchtop case. It is ideal for laboratory
use and applications requiring portable temperature measurement. There is one
basic model, a single-channel unit that features a terminal, M8, or M12 input that
is configured for use with a RTD signal. This meter is factory configured and
calibrated. Standard features include: internal battery or external DC power
supply operation, analog output, and user programmable alarms. The optional
built-in wireless transmitter allows for remote monitoring, chart recording and
data logging. A variety of user configurable options and settings include: update
rate, dampening, units, backlight level, alarm setting, analog output scaling, and
auto-power-off.
1-2
Description
Caution, risk of electric shock
Caution, refer to accompanying documentation
Figure 1-1. IEC Symbols
ll electrical connections and wiring should be performed by
suitably trained personnel only.
www.DataSheet.net/
C UTION:
Datasheet pdf - http://www.DataSheet4U.co.kr/