Handling And Storing The Product; Identification; Nameplate - Grundfos SE 9-30 kW Service Manual

1
Lifting points, vertical installation
Lifting points, horizontal installation

4. Handling and storing the product

Protect the pump against moisture and heat during storage.
Transportation and storage temperature: -20 to +60 °C (-4 °F to
+140 °F.
If the pump is not in operation or is being stored for more
than one month, turn the impeller once a month.
WARNING
Crushing hazard
Death or serious personal injury
‐
Do not turn the impeller by hand. Always use an ap-
propriate tool.
After a period of storage, inspect the pump before putting it into
operation. Make sure that the impeller can rotate freely. Pay
attention to the condition of the shaft seals, O-rings and the cable
entries.

5. Identification

5.1 Nameplate

The pumps can be identified by the nameplate on the motor top
cover.
6
2
Nameplate example for Ex-proof pump
Pos. Description
1 EU Notified Body approving the Ex manufacturer
2 EU Explosion protection certificate no
3 UK Approved Body approving the Ex manufacturer
4 UK Explosion protection certificate no
5 Marking of explosion protection and Ex description
6 Pump type designation
7 Pump type designation (line 2)
8 Model number
9 Ambient temperature
10 Enclosure class
11 Maximum installation depth
12 Maximum head
13 Maximum flow rate
14 Number of phases
15 Maximum liquid temperature
16 Rated power input P1
17 Rated power output P2
18 Rated speed
19 Cos φ, 1/1-load
20 Rated voltage, delta connection
21 Rated current, delta connection
22 Rated voltage, star connection
23 Rated current, star connection
24 Frequency
25 Insulation class
26 Production code (YYWW)
27 Approvals
28 Weight