6. Remove the cable clamp fastening screws (b) and the cable
clamp (c) first, then remove the cable.
168a
c
9.2.1 Removing the PVS-3 vibration sensor and SM 113 module
For variants with SM 113 module, the PVS-3 vibration sensor must
be removed from the bracket.
1. Remove sensor wires from the SM 113 and the PVS-3 bracket.
2. Remove the PVS-3 vibration sensor from the bracket if the SM
113 module needs to be replaced.
168
552
b
3. Remove the screws holding the feet of the PVS-3 bracket to the
stator housing, then remove the bracket.
23