TLE987x EvalBoard
5 Communication interfaces
5
5.1
The integrated LIN transceiver is connected to a banana jack and additionally to the uIO BSL interface. In order
to integrate the device in a LIN network, it is sufficient to use the single wire banana interface. The BSL interface
programs the device via LIN. For further information about the uIO interface is available at
www.infineon.com/uio
5.2
Debugging is possible via the on-board debugger that can be connected via an USB cable and the SWD
interface; the signals are routed through the 10-pin header SWD interface.
User Manual
Arrow.com.
Downloaded from
Communication interfaces
LIN (via banana jack and uIO BSL)
or www.hitex.com/uio.
Debugging
12
v1.0
2020-07-30