Communication Interfaces; Lin (Via Banana Jack And Uio Bsl); Debugging - Infineon TLE987 Series User Manual

TLE987x EvalBoard

5 Communication interfaces

5 Communication interfaces
5.1

LIN (via banana jack and uIO BSL)

The integrated LIN transceiver is connected to a banana jack and additionally to the uIO BSL interface. In order
to integrate the device in a LIN network, it is sufficient to use the single wire banana interface. The BSL interface
programs the device via LIN. For further information about the uIO interface is available at
www.infineon.com/uio or www.hitex.com/uio.
5.2

Debugging

Debugging is possible via the on-board debugger that can be connected via an USB cable and the SWD
interface; the signals are routed through the 10-pin header SWD interface.
User Manual 12 v1.0
2020-07-30