Ⅱ . Safety Instruction, Operation & Maintenance Of Electric Forklift Truck; Shipping, Loading, Unloading And Slinging - Baoli CPDS15 Operation & Service Manual

Three-wheel electric forklift truck
Table of Contents

Advertisement

Ⅱ . Safety instruction, operation & maintenance of electric forklift truck
It is important for drivers and managers to remember the principle of "safety first" and
ensure the safety operation as the description of Operation & Service Manual. Please read
this manual thoroughly. This will give you a complete understanding of Baoli forklifts and
permit you to operate them correctly and safely.

2.1 Shipping, loading, unloading and slinging

2.1.1 Ship the forklift truck
(1) Apply the parking brake when shipping the forklift trucks by container or freight car.
(2) Fix the mast and the balance weight with steel wire and use jacks to prevent the
forklift trucks from moving in the cabin.
(3) Pay attention to the overall length, width, height when loading, unloading and
shipping and conforming the regulations is necessary.
2.1.2 Load and unload the forklift truck
(1) Use the plate with enough length, width and strength.
(2) Pull the parking brake and use jacks to stop the wheel.
(3) Fasten the plate on the center of the cabin, there must be no grease on the plate.
(4) The left and right height of the plate must be equal to make the loading and
unloading smooth.
(5) Don't change the direction on the plate to prevent the danger.
(6) Reverse the truck slowly when loading the forklift truck on the freight car.
2.1.3 Sling the forklift truck
(1) Only the specially trained personnel can sling the truck.
(2) Sling points should be always at the positions specified in sling nameplate.
(3) The slinging cable must be enough to hang the forklift truck.
(4) Disassembled parts of forklift truck must be slung in the appointed position.
(5) Single transporting if necessary after disassembling the mast and balance weight.
Specification
Balance weight
Overhead guard
Mast
(Lifting height 3000mm)
Model
Max. outline size
Slinging capacity
Max. outline size
Slinging capacity
Max. outline size
Slinging capacity
Unit
CPDS15
362×810.5×1066
mm
kg
>600
1066×1322×1550
mm
kg
>100
361×1066×2130
mm
kg
>600
3
CPDS18
402×810.5×1066
>800
1066×1322×1550
>100
361×1066×2130
>600

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpds18

Table of Contents