Caution Plates - Baoli CPDS15 Operation & Service Manual

history documents periodically. Never start the electric control of incorrectly-installing
vehicles.
Only trained people can do periodic maintenance and replace the damage parts with
genuine parts of controller. Use the genuine parts produced by our company for ensuring
the quality.
During inspection, if there is status that may bring damage or cause dangerous, inform
the agent immediately, they will make a decision of the operating security.
2.6.4 Particular notice
(1) As a special vehicle, electric forklift trucks need professional maintenance and
authorized persons' driving to suit for the working environment, or errors will be shown in
electric system (including meter).
(2) As the power of the vehicle, battery is different from traditional energy; its actual
capacity is related to working state and aging, different from rated capacity. According to
the common performance, when capacity drops to 20% (one cell), charge the battery to
prolong the life of battery.
(3) Using PC machine or hand-hold device connecting with control device, the users
can enter into software setting interface with powerful functions within certain limits. You
can measure and know the working condition of truck more intuitively, for example as
follows: working current and rotating speed of drive motor; working current, rotating speed,
working hours and trouble list of lift motor, and other system parameters.

2.7 Caution plates

The caution plates attached on the vehicle indicates the operating method and
instructions. Before driving it, please be sure to read them thoroughly. If the caution plate
drops, stick it again. When maintaining, check if the caution plate is complete and the
writing is legible, if necessary, please replace them.
(1) Safety mark
People are forbidden to stand on or down the fork.
14