Distribution And Setting Of Sensor - Baoli CPDS15 Operation & Service Manual

4.4 Distribution and setting of sensor

4.4.1 General description
The electric forklift truck embodies many superior features, such as infinitely variable
lifting speed, steering speed adjuster and pedal setting, which can be adjusted and set in
real-time by EYE software. These functions have been initialized before delivery and
needn't to be changed except the conditions as follows:
1. After long-term operation, the loose parts will be indicated with alarm codes.
2. The damaged electronic components are indicated with alarm code, replace them.
3. When replacing or disassembling other parts, it's necessary to reset the value after
disassembling steering, lifting potentiometers.
4.4.2 Steering potentiometer
1. Specification of steering potentiometer
Resistance limitation: 0KΩ-5KΩ
Steering angle: 0°-360°
Voltage: 12V
2. Adjustment
a) Install the potentiometer on truck body, make steering wheels on zero degree
(straight traveling direction), adjust potentiometer to make output resistance value be about
2.5 KΩ, if there is deviation, the output resistance must be between 0 KΩ and 5 KΩ when
locating on 90°, -90° position.
b) Connect PC machine with controller connector.
42