Advertisement
PROEDGE REPEATERS & GATEWAYS
INSTALLATION MANUAL
COMMISSIONING OF THE PROEDGE GATEWAY
Navigate to the "Devices list" page within the mobile application, select the "Gateways"
section, and initiate the addition procedure by clicking the "Add Gateway" button.
Currently, there are two available options for adding Gateway:
1. Scanning the QR code (primary)
2. Filling in the serial number manually (secondary)
Commissioning Steps:
1. Scan the Device QR Code or as an alternative fill in its Serial Number manually in the
appropriate field;
2.
Wait for the pairing to complete;
• Try again, if the process failed, or try to get the logic of the failed process from
software engineers (after the Logs feature is implemented)
Page - 10
| GATEWAY COMMISSIONING
Note: Placement of the gateway must be performed
by authorized personnel to ensure the best antenna
conditions
Advertisement
