Table of Contents
Advertisement
PROEDGE Smart Lock
INSTALLATION MANUAL
RETROFIT INSTALLATION ON
CORRUGATED DOOR
As earlier describes, the ProEdge Smart Lock
can be retrofitted on C-486 latches using the
same bolt pattern.
Put the lock in the "unlocked" position.
Mount the four (4) M6 carriage bolts.
Mount the washers and nuts on the
backside.
Note: It is recommended to tighten all
bolts and nuts with a torque between
7Nm and 9Nm
| CORRUGATED DOORS
T
R
Page - 9
Advertisement
Table of Contents
