Table of Contents
Advertisement
PROEDGE Smart Lock
INSTALLATION MANUAL
NEW INSTALLATION ON
CORRUGATED DOORS
Measure from bottom of door to
centerline of the four (4) holes: 1000mm.
Mark the four (4) holes for the latch as per
specifications.
With an electrical drill and drill bit Ø7mm, drill the
four (4) holes in the door.
Note: Make sure to remove any debris/
burrs on the backside where the drill
penetrated.
Put the lock in the "unlocked" position.
Page - 6
| CORRUGATED DOORS
T
R
T
7
63
76
193
R
Advertisement
Table of Contents
Need help?
Do you have a question about the ProEdge and is the answer not in the manual?