Table of Contents
Advertisement
PROEDGE Smart Lock
INSTALLATION MANUAL
NEW INSTALLATION ON FLAT DOORS
Measure from bottom of door to
centerline of the 2x holes: 1000mm.
Mark the 2x holes for the latch as per
specifications to the edge of the door
(Yellow line).
With an electrical drill and drill bit Ø7mm, drill the
2x holes in the door.
Note: Make sure to remove any
debris/burrs on the backside where
the drill penetrated.
Demount the 2x M6 bolts, washers and spacers
Page - 12
| FLAT DOORS
1000
T
R
233
68
7
Advertisement
Table of Contents
