Table of Contents
Advertisement
RZ Family / RZ/G, RZ/A Series
3.1.4
SMARC edge Connector (CN4)
The RTK9743U11C01000BE can be connected to an external expansion board through the Carrier board connecting
connector (CN4).
Figure 3.5 illustrates the layout of Carrier board connecting connector pins. For the assignment of Carrier board
connecting connector pins, please refer to the section 4 "MODULE PIN-OUT MAP" of the document "SMARC
module 2.1 Specification (sget.org)".
Figure 3.5
Layout of Carrier Board Connecting Pins
R01UH0990EJ0101
Rev.1.01
Jul 28, 2022
3. Operation Specifications
Page 63 of 83
Advertisement
Table of Contents
