Moxa Technologies NPort DE-211 Series Quick Installation Manual
Hide thumbs
Also See for NPort DE-211 Series:
- Hardware installation manual (35 pages) ,
- Quick installation manual (2 pages) ,
- Tech note (5 pages)
Related Manuals for Moxa Technologies NPort DE-211 Series
Summary of Contents for Moxa Technologies NPort DE-211 Series
- Page 1 NPort DE-211 Series Quick Installation Guide Version 8.2, January 2021 Technical Support Contact Information www.moxa.com/support 2021 Moxa Inc. All rights reserved. P/N: 1802002112404 *1802002112404*...
-
Page 2: Package Checklist
Overview Welcome to Moxa’s NPort Express DE-211, a compact palm-sized data communication device that allows you to control RS-232/422/485 serial devices over a TCP/IP based Ethernet network. Package Checklist Before installing the NPort Express DE-211, verify that the package contains the following items: •... - Page 3 Reset Button • Press the Reset button continuously for 3 sec to erase the password. After 3 sec, the Ready LED will flash on/off every half second. Release the reset button at this time to erase the password. • Press the Reset button continuously for 10 sec to load factory defaults. After 10 sec, the Ready LED will flash on/off every half second.
-
Page 4: Hardware Installation Procedure
Hardware Installation Procedure Placement Options Wall Mount DIN-Rail In addition to placing the DE-211 unit on a desktop or other horizontal surface, you may also make use of the DIN-Rail or Wall Mount options, as illustrated here. DIP Switch Settings and Explanation The top panel of the DE-211 contains the following table, which describes how to set up the serial port using the four DIP switches located on DE-211’s rear panel. -
Page 5: Pin Assignments And Cable Wiring
Software Installation Information You may use the default IP address 192.168.127.254 to log into the DE-211 to configure proper settings for your environment. More details you may find the User Manual from Moxa’s website. Pin Assignments and Cable Wiring Female DB25 Connector Pinouts WARNING Pin 1 is reserved for debugging. - Page 6 RS-422 Wiring RS-485 Wiring - 6 -...
-
Page 7: Environmental Specifications
DB25 Terminal Block Kit (RS-422, RS-485-2W/4W) Environmental Specifications Power requirements 12 to 30 VDC 150 mA (max.) at 12 V 92 mA (max.) at 24 V Operating temp. 0 to 55°C Ambient relative 5 to 95% (non-condensing) humidity Dimensions (W×D×H) 90.2 × 100.4 × 22 mm (including ears) (3.55 ×...