Operating The Mower; Height Of Cut - Hayter HARRIER 56 Owner's Handbook Manual

Blade brake clutch - auto drive

Hide thumbs Also See for HARRIER 56:

Owner's handbook manual (42 pages)

Owner's handbook manual (42 pages)

Owner's handbook manual (40 pages)

Table Of Contents

Table of Contents

1.18

SAFETY NOTICE

WARNING - PREVENT ACCIDENTAL STARTING:

Always stop the engine and disconnect the spark plug lead

before cleaning, inspecting or working on the machine.

WARNING - PREVENT ACCIDENTS: Before mowing,

thoroughly inspect the area where the mower is to be used

and remove all objects, which when contacted by the

mower cutterblade could become dangerous projectiles.

Inspect the area for hidden obstructions which when con-

tacted by the cutterblade could risk health and safety. Re-

member the location of these obstructions and ensure

that you mow around them.

IMPORTANT - PREVENT ENGINE DAMAGE: DO

NOT use the mower on a slope greater than 20 degrees.

HEIGHT OF CUT

To adjust the height of cut: Grip the lever and pull sideways

to disengage it from the locking notch, then push forwards to

lower or pull backwards to raise the height of cut. Finally

release the lever at the required position and ensure it locks

firmly into one of the nine notch settings.

Always select a height of cut to suit the operating conditions.

Aim to prevent engine overloading and blockages by avoid-

ing low cuts in long grass conditions. Be prepared to make

two cuts when the grass is long.