Rectangular damper
Table of content
4. Kit and recommended tools
1. Installation video
Click here to open link
2.General information
The component of the option will be delivered separately from
the unit and must be installed by the installer.
Electrical cables must be adjusted to the unit. Connect length
to avoid any damage inside the unit.
The damper will be used to isolate any passage of outside air
into the unit when the unit is stopped.
3. Control configuration
In addition to installing and connecting the option, configure
the unit's option in the hand controller HMI using the
commissionning manual.
2
www.swegon.com
MULTI.ESENSA.CTr.230609
The document was originally written in English.
We reserve the right to alter specifications.