Related Manuals for Swegon ESENSA Series
Summary of Contents for Swegon ESENSA Series
- Page 1 Commissionning instructions for the product range ESENSA Consult the latest version of this manual on our website: www.swegon.com...
-
Page 2: Table Of Contents
3-way mixing box Aspiration grid Flexible connection Silencer Roof for outdoor installation Filter Slip-clamp connection Double deflection grid Roof for outdoor installation Multi-leaf damper www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. -
Page 3: Main Board
RJ3 = RJ12 connector for Modbus Pressure CA mode on supply flow (option - prewired) RED LED ON = ALARM RJ4 = RJ12 connector for Modbus Pressure CA mode on exhaust flow and defrost detecting (option - prewired) www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. -
Page 4: Commissioning With Tactouch Interface
“contacts Main menu button Number of current alarms swegon.com (Category Products and TACtouch simulator) • K1-K2-K3 master” (see point 2.1.4): set no only if the Menu AHU is to be controlled with TACtouch control screen Accessing the main menu, see section 2.1.2... -
Page 5: Main Menu
In between the programmed interval, the selected function is OFF. www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. -
Page 6: Basic Setup
Supply Exhaust Supply+Exhaust Ratio exhaust/supply 5...999% 100% Sleep factor on K3 10...100% 100% Pressure initialisation Via Airflow Airflow Via Pressure Start reference initia- lisation www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. -
Page 7: Advanced Setup
Setting Settings Factory Reaction speed 0...10 range setting Damper Logic Positive Negative periodic maintenance Confirmation of Negative commissioning completed successful commis- sioning www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications. - Page 8 Supply or Extract ? Supply Supply Extract Reaction speed 1...10 Supply air, min 0...20°C 15,0°C Supply air, max 11...50°C 28,0°C Stop fan if T°Supply <5°C www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications.
- Page 9 Factory range setting Control mode Exhaust Supply Supply Setpoint -9,9...99,9°C 21,0°C PID - Proportional Band 0...100 PID - Integral 0...100 PID - Derivate 0...100 www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications.
- Page 10 Setting Settings Factory range setting Display time Activate Frost protection -29...+99°C -9°C RX rotation speed 2...10RPM 2RPM Service alarm time 0...999999h Stop fan 0...999999h www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications.
- Page 11 Advanced setup. In case of Electrical postheating coil presence, select “KWout”. In case of Water postheating coil presence, select “NV”. Setting Range Factory Postheat None, KWout, NV None www.swegon.com www.swegon.com We reserve the right to alter specifications. We reserve the right to alter specifications.
- Page 12 GB.ESENSA.MC.2300818 The document was originally written in English. www.swegon.com We reserve the right to alter specifications.